Samsung SGH-P716 User Manual

Contents

Messages94Password: enter the password required to connect to theMMS server.APN: enter the access point name used for the address of theMMS server.For further details, contact your service provider.E-mail-Profile (Menu 1.8.5)In this menu, you can configure various network settings thatare required when you send or receive e-mail messages.Notes:• Your service provider can give you information about each setting.• If you change the e-mail settings without first checking with yourservice provider, the E-mail feature may not work properly.The following options are available for each profile:Profile Name: enter a name that you wish to assign to the e-mail profile.Connect Name: enter a descriptive name for the connection.User Name: enter the user ID required to access the GPRSnetwork.Password: enter the password required to access the GPRSnetwork.APN: enter the access point name used for the address of theGPRS network gateway.Messages95Broadcast (Menu 1.9)This network service allows you to receive text messages onvarious topics, such as the weather or traffic. Cell Broadcast(CB) messages display as soon as they are received, providedthat:● the phone is in Idle mode.● the Receive option is set to Enable.● the message channel is currently active on the channel list.The following options are available:Read: lets you view the received message. The Volatile boxdisplays the messages from the network, but loses itscontents as soon as the phone is switched off. Scroll throughthe message by using the Up and Down keys. While reading amessage, press the Save soft key to store the message in theArchive box for later retrieval.Receive: allows you to enable or disable the reception ofbroadcast messages.Channel list: allows you to indicate the channels from whichyou wish to receive broadcast messages. The followingoptions are available:Select: use to enable or disable channels on the list bymarking or unmarking them respectively. A check markdisplays in front of each selected channel.Add channel: use to enter the ID and title for a new channel.Delete: use to remove a channel from the list.Edit: use to change the ID and title of an existing channel.