Network Services1404. Enter the number to which the calls are to be forwardedand press the OK soft key.To enter an international code, press the 0 key until the +sign displays.The phone sends your settings to the network and thenetwork’s acknowledgement displays.You can deactivate all call forwarding settings by selecting theCancel All option.Call Barring (Menu 7.2)The call barring network service allows you to restrict yourcalls.You can use the following options to restrict voice calls and/ordata calls:All Outgoing: calls cannot be made.International: international calls cannot be made.International Except to Home: when abroad, calls can bemade only to numbers within the current country and to yourhome country, which is the country where your home networkprovider is located.3. To Press theactivate call forwarding Activate soft key.Go to step 4.change the number to becalledChange soft key.Go to step 4.deactivate call forwarding Remove soft key.Network Services141All Incoming: calls cannot be received.Incoming while Abroad: calls cannot be received when youare using your phone outside of your home service area.Cancel All: all call barring settings are deactivated; calls canbe made and received normally.To set your call barring options:1. Select a call barring option by pressing the Up or Downkey, and then press the Select soft key.2. Select the type of calls, voice or data, by pressing the Upor Down key, and then press the Select soft key.3. Press the Activate soft key to confirm your settings.4. Enter your call barring password supplied by your serviceprovider.The phone sends your settings to the network and thenetwork’s acknowledgement displays.To deactivate specific call barring settings:1. Select the call barring option to be deactivated.2. Select the type of calls to which this option applies.3. Press the Deactivate soft key.4. Enter your call barring password supplied by your serviceprovider.The phone sends your settings to the network and thenetwork’s acknowledgement displays.You can also deactivate all call barring settings by selectingthe Cancel All option.