Phonebook menu60Add entry (Phonebook 1.2)You can store phone numbers and thecorresponding names in the memory of your SIMcard. In addition, you can store up to 1000 namesin the phone’s memory, and each name can beassociated with up to five numbers.1. Enter the number you want to save.Notes:• If you make a mistake while entering a number,correct it using the C key. For further details, seepage 28.• To insert a dialling pause for special phoneservices, such as banking by phone, hold downthe key. “P” is displayed to indicate that apause will be inserted at that point in the dialling.2. When you are sure that the number is correct,press the Save soft key.3. Select the memory where the number is to bestored, either Phone or SIM, and press theSelect soft key.Note: If you change phones, any numbers storedin your SIM card will automatically beavailable with the new phone, whereas anynumbers stored in the phone’s memorymust be entered again.4. If you select SIM in step 3, go to step 5.If you select Phone in step 3, choose a numbertype using the Up or Down key and press theSelect soft key.5. Enter the associated name.Phonebook menu61For information about how to enter characters,see page 42.6. When you are satisfied, press the OK soft key.7. If you select Phone in step 3, go to step 8.If you select SIM in step 3, enter the locationnumber and press the OK soft key.8. If you want to change the entry, use the options.for information about how to do it, see page 58.If you want to return to idle mode, press thesoft key or the key.Storing a number in idle modeAs soon as you start to enter a number in idlemode, Save appears above the left soft key to allowyou to store the number in Phonebook.Continue the procedure from step 1 on page 60 tostore the number.Speed-dial list (Phonebook 1.3)You can set up to eight speed-dial entries and thendial them easily whenever you want, simply bypressing the associated number key.Setting up speed-dial entries1. Press the Up or Down key to scroll to an emptylocation and press the Select soft key.2. When the Edit number option highlights, pressthe Select soft key.