Getting Started202. Plug the adapter into a standard AC wall outlet.3. When charging is finished, unplug the adapter from thepower outlet and disconnect it from the phone by pressingthe buttons on both sides of the connector and pulling theconnector out.Note: You must unplug the adapter before you remove the batteryfrom the phone during charging; otherwise, the phone could bedamaged.Low Battery IndicatorWhen the battery is weak and only a few minutes of talk timeremain, a warning tone sounds and the “Warning LowBattery” message repeats at regular intervals on the display.When this happens, your phone turns off the backlight toconserve the remaining battery power.When the battery level gets too low, the phone automaticallyturns off.Getting Started21Switching the Phone On/Off1. Open the phone.2. Press and hold the key until the phone switches on.3. If the phone asks you to enter the phone password, enterthe password and press the OK soft key. The phonepassword is preset to “00000000” at the factory. Forfurther details, see page 159.4. If the phone asks for a PIN, enter the PIN and press theOK soft key. For further details, see page 160.The phone searches for your network and after finding it,the idle screen, illustrated below, appears on the display.Now, you can make or receive a call.Note: The display language is preset to English at the factory. Tochange the language, use the Language menu (Menu 7.4).For further details, see page 118.5. When you wish to switch the phone off, press and hold thekey until the power-off image displays.Service Provider05:17 AMTue Mar 30Menu Name