Phone Settings120SIM Lock (Menu 7.5.5)When the SIM Lock feature is enabled, your phone only workswith the current SIM. You must enter the SIM lock code tounlock the SIM so you can use a different SIM card.Once you have entered the lock code, you are asked toconfirm your entry.FDN Mode (Menu 7.5.6)FDN (Fixed Dial Number) mode, if supported by your SIMcard, allows you to restrict your outgoing calls to a limited setof phone numbers.The following options are available:Disable: you can call any number.Enable: you can only call phone numbers stored in PhoneBook. You must enter your PIN2.Note: Not all SIM cards have a PIN2. If your SIM card does not, thismenu does not display.Change PIN2 (Menu 7.5.7)The Change PIN2 feature allows you to change your currentPIN2 to a new one. You must enter the current PIN2 beforeyou can specify a new one. Once you have entered a newPIN2, you are asked to confirm it by entering it again.Note: Not all SIM cards have a PIN2. If your SIM card does not, thismenu does not display.Phone Settings121Extra Settings (Menu 7.6)You can turn the automatic redialing or answering features onor off.The following options are available:Auto Redial: when this option is checked, the phone makesup to ten attempts to redial a phone number after anunsuccessful call.Note: The interval between two call attempts varies.Open to Answer: when this option is checked, you cansimply open the phone to answer a call. When it is unchecked,you must open the phone and press a key to answer a call,depending on the setting of the Anykey Answer option. Seebelow.Anykey Answer: when this option is checked, you cananswer an incoming call by pressing any key, except thekey and the Reject soft key. To reject the call, press thekey or the Reject soft key.When this option is unchecked, you can only press thekey or Accept soft key.To turn a feature Press theon On soft key. A check mark displays infront of the option.off Off soft key. The check mark no longerdisplays.