72Viewing photosTo view photos you have taken, press the View soft key inCamera mode. The list of the photos in the currently selectedmemory displays.Recording video clips1. From Camera mode, press to switch to Camcordermode. The image to be recorded displays.2. Adjust the image to be recorded.• Move the Volume key Up or Down to zoom in or out on yoursubject.• Move the Navigation key to the Right and then Left or Right toadjust the brightness of the image.• Press the Menu soft key to access the camcorder options.• Use the number keypad to adjust the image quickly.3. To start recording, press or . The timer on thebottom of the screen shows the elapsed time.4. Press or to pause and resume recording.5. To stop recording, press . Press the Save soft key tosave the video clip.The video clip is saved to the location specified in theDefault Storage option. After saving the video, thecamcorder automatically returns to Video Preview mode.Setting camcorder optionsYou can customize the camcorder settings. Once you change thevideo settings, the corresponding icons display at the top of thevideo preview screen.On the video preview screen, press the Menu soft key.• Camera Mode: switches to Camera mode.• Recording Mode: select a video recording mode. Select Limit for MMSto record a video suitable for an MMS message. Select Normal torecord a video within the limit of the currently available memory.• Resolution: allows you to select a video frame resolution.• White Balance: allows you to select the white balance mode to adjustthe color balance of videos.• Effect: changes the color tone for videos or applies a special effect tovideos.• Video Share: This option allows you to launch the Video ShareApplication.Note: Before using Video Share, make sure you turn off Wi-Fi if it has beenenabled. For more information, refer to “Disconnecting Wi-Fi” onpage 88.i637.book Page 72 Monday, April 20, 2009 10:19 AM
