Samsung SMG-400 User Manual

Contents

5-71OncdrudpFunction It activates the CDR to be output to the UDP Link. Basically, the CDR UDPLink output is turned Off.Before using this command, the UDP IP address and port for displaying the CDRinformation on the UDP Link must be set. These values do not have Defaults, andusers must set them.Procedure 1. If you want to display the CDR information on the UDP Link, type 'Oncdrudp'at the SMG-400 prompt, and press [Enter].SMG400:165.213.81.230> Oncdrudp>>>[CDR] Turn On CDR Output on UDP Link>>>[CDR] UDP IP Address = 165.213.87.85>>>[CDR] UDP Port: 8800Goodvalue = 0 = 0x0SMG400:165.213.81.230>2. If you make the UDP Link to the UDP Server program using the port of theCDR UDP IP address specified for the system, the CDR information isdisplayed. For more details on the CDR information, please see "Chapter7Using the CDR (Call Detail Record)."opened UDP socket with port no. 8800 ...-----------------------------------------GVO: 1/2/2002 18:39:07 --:--:-- 201 2111 165.213.87.74 20 0026 24DVR: 1/2/2002 18:39:08 --:--:-- - 9 - 43 0202 0DVR: 1/2/2002 18:39:11 --:--:-- - 9 - 42 0202 0DVR: 1/2/2002 18:39:14 --:--:-- - 9 - 41 0202 0DVI: 1/7/2002 14:59:13 --:--:-- 201 4111 - ffff 001c 0DVO: 1/7/2002 14:59:12 --:--:-- 201 4111 165.213.81.230 20 001c 0DVI: 1/7/2002 15:00:25 15:00:25 4112 201 165.213.87.83 20 0010 64DVI: 1/7/2002 11:27:32 --:--:-- 4111 201 - 20 0010 0DVI: 1/7/2002 11:27:34 --:--:-- 4111 201 - 20 0010 0