4-17Configuring the VoIPThis section describes the procedures for the SMG-400 VoIP configuration. The SMG-400 VoIPconfiguration procedure is determined by the Gatekeeper service that translates terminal aliasessuch as telephone number in E.164 format, e-mail address, and H.323 ID into an IP address.❶ When not using GatekeeperYou have to create the VoIP table. To create the VoIP table, consult with the networkadministrator for required information.❷ When using GatekeeperRegister the information of Gatekeeper. The following information is required for registration.y IP address and Alias (host name) of Gatekeepery H.323 ID and E.164 ID of the SMG-400 to be registered in GatekeeperOption ❶❶❶❶ When not using GatekeeperCreate the VoIP table according to the following directions.1. At the SMG-400 prompt, type ‘voipmenu’ and press [Enter].help Print This Listsysmenu System Configurationpstnmenu PSTN Configurationvoipmenu VoIP Configurationquit LogoutPlease Press Enter Key!!!SMG400:165.213.81.230> voipmenu2. screen is displayed. Type ‘5’ and press [Enter].<<<<< VoIP Configuration Menu >>>>>[0] VoIP General Option[1] VoIP DSP Option[2] VoIP Gatekeeper Option[3] VoIP Routing Table[4] VoIP Caller ID Table[5] VoIP Remote IP Table[6] VoIP Remote IP Status[7] Save & Exit[8] ExitSelect ? 5