7-5How to receive call information - UDP Link1. Check the current setting status.: The current UDP Link is inactive, and the UDP Port information and UDP IP Address are not set.SMG400:165.213.81.230> CDRsetlist>>>[CDR] Turn Off CDR Output on TCP Link>>>[CDR] TCP Port: 8200>>>[CDR] Turn Off CDR Output on UDP Link>>>[CDR] UDP Port: Unknown>>>[CDR] UDP IP Address = Unknownvalue = 37 = 0x25 = '%'SMG400:165.213.81.230>2. Set the UDP IP Address and Port.: The IP Address and port for UDP Link connection are set.SMG400:165.213.81.230> CDRudpport 165,213,87,154,50000<- There are dots (.) between Numbers.>>>[CDR] Set CDR Output on UDP IP = 165.213.87.154>>>[CDR] Set CDR Output on UDP Port(50000)Goodvalue = 0 = 0x0SMG400:165.213.81.230> CDRsetlist>>>[CDR] Turn Off CDR Output on TCP Link>>>[CDR] TCP Port: 8200>>>[CDR] Turn Off CDR Output on UDP Link>>>[CDR] UDP IP Address = 165.213.87.154<- IP Address and Port number are set up.>>>[CDR] UDP Port: 50000value = 26 = 0x1aSMG400:165.213.81.230>