Samsung VP-D10 Service Manual

Also see for VP-D10: Owner's instruction book Owner's instruction book Owner's instruction book Owner's instruction book Owner's instruction book

Contents

Samsung Electronics 3-13. Alignment and Adjustment3-1. VCR Adjustment3-1-1. VCR Adjustment Preparation1. How to get into the VCR adjust mode.STEP 11. Connect the power source.2. Set the mode switch of the video camera to"PLAYER" position.3. Insert standard tape into the video camera andset to "PLAY" position.4.Press the "PLAY" button on the video camera orthe remote controlSTEP 21. Press and hold the "F.ADV" button on theremote control and "ENTER" button on thevideo camera at the same time for more than 10seconds.2. When monitor OSD appears as shown below,VCR adjustment mode has been activated suc-cessfully.3. When changing the adjustment item after theadjusted value is designated, press the"START/STOP" button.NO MODE EVR EPR1 V-REF 79H 79HSP PLAY0:00:00:01S64 LOO01 01380Indicates preset valuesIndicates the adjusted valuesIndicates current adjustment item.