Samsung VP-D10 Service Manual

Also see for VP-D10: Owner's instruction book Owner's instruction book Owner's instruction book Owner's instruction book Owner's instruction book

Contents

3-29Samsung ElectronicsAdjustment and Adjustment3-3. LCD AdjustmentNotes: For LCD adjustment, use the buttons on the video camera and the remote control.After each adjustment step is completed, OSD shows "OK".EEPROM(ICL202) stores confirmed adjustment value of each adjustment step.After finishing the adjustment, turn power off.Note: In service adjustment mode, button names are different from those in customer function controlmode.STEP 11. Connect the power source(battery/DC cable).2. Set the "CAMERA/PLAYER" switch to"CAMERA" position.3. Camera screen and OSD appears.4. Open housing of the video camera andremove tape.STEP21) Press and hold the "EDIT(+)" button on thevideo camere and"SELF TIMER" button on theremote control at the same time for more than 5seconds.2) Press the “DISPLY” button to make color barappear.When monitor OSD shows as above screen, LCDadjustment mode has been activated successfully.Note : "XX" indicates variable values.1. How to get into the LCD adjust mode.2. Functions of each button on the Remote ControlMonitor screenRemote Control Button LocationLCDMODE 1EPR:XX EVR:XX01DescriptionButtonSTART/STOP (Confirm)FF (Mode Up)REW (Mode Down)PLAY (Data Up)STOP (Data Down)Stores changed value in the adjustment mode.Shift adjustment address to left.Shift adjustment address to right.Down value.Up value.