Samsung VP-D10 Service Manual

Also see for VP-D10: Owner's instruction book Owner's instruction book Owner's instruction book Owner's instruction book Owner's instruction book

Contents

3-26 Samsung ElectronicsAdjustment and Adjustment6. AUTO WHITE BALANCE (indoor)1) Camera mode & 3100˚ K/5100˚ K gray scale chart2) Connect a video output terminal to a vec-torscope and a TV.3) Press the FF(Mode Up)/REW(Mode Down)button so that OSD shows "265 XX XX".4) Ensure that camera picks up image 40μs on3100˚K gray scale chart precisely and the illumi-nation is 1500-2000 Lux.5) Press the START/STOP (Confirm) button toensure that white spot on a vectorscope is mov-ing in the middle of screen.6) There's is a flicker on screen after finishing theadjustment.7. AUTO WHITE BALANCE (outdoor)1) Camera mode & 3100˚ K/5100˚ K gray scale chart2) Connect a video output terminal to avectorscope and a TV.3) Press the FF(Mode Up)/REW(Mode Down)button so that OSD shows "266 XX XX".4) Ensure that camera picks up image 40 on 5100gray scale chart (3100 gray scale chart + C16 fil-ter) precisely and the illumination is 1500-2000Lux.5) Press the START/STOP (Confirm) button toensure that white spot on a vectorscope is mov-ing in the middle of screen.6) There's is a flicker on screen after finishing theadjustment.8. R-Y POSITIVE GAIN1) Camera mode & 3100˚ K gray scale chart2) Connect a video output terminal to a vec-torscope and a TV.3) Press the FF(Mode Up)/REW(Mode Down)button so that OSD shows "70 XX XX".4) Ensure that camera picks up image on 3100˚ Kcolor bar chart precisely and the illumination is1500-2000 Lux.5) Press the PLAY (Data Up)/STOP (Data Down)so that the red level is 70IRE.6) Press the START/STOP (Confirm) button tostore data.7) There's is a flicker on screen after finishing theadjustment.9. R-Y NEGATIVE GAIN)1) Camera mode & 3100˚ K gray scale chart2) Connect a video output terminal to a vec-torscope and a TV.3) Press the FF(Mode Up)/REW(Mode Down)button so that OSD shows "71 XX XX".4) Ensure that camera picks up image on 3100˚ Kcolor bar chart precisely and the illumination is1500-2000 Lux.5) Press the PLAY (Data Up)/STOP (Data Down)so that the cyan level is 65IRE.6) Press the START/STOP (Confirm) button tostore data.7) There's is a flicker on screen after finishing theadjustment.