WEC8500/8050 Operation Manual Version 5.2Samsung Electronics America page 209 of 5335.3.3 WPA/WPA2 802.1x ConfigurationThe WPA/WPA2 802.1x, one of wireless LAN authentication types does authenticationthrough an authentication server such as a Remote Authentication Dial-In User Service(RADIUS) server.To configure WPA/WPA2 802.1x to WLAN, execute the command as follows:As the 802.1x authentication needs interoperation with a RADIUS server, theRADIUS server required for the WLAN security configuration must be configuredfirst. For more information about RADIUS server configuration, see ‘8.1 RADIUSServer Configuration’.Configuration using CLI1) Go to configure wlan configuration mode of CLI.WEC8500# configure terminalWEC8500/configure# wlan 12) Go to security configuration mode and initialize the configuration.WEC8500/configure/wlan 1# securityWEC8500/configure/wlan 1/security# setDefault3) Configure the WPA type.WEC8500/configure/wlan 1/security# wpa_typeParameter Descriptionwpa_type WPA type (wpa/wpa2): WPA Version 2 must be enabled at all times.- wpa: WPA Version 1- wpa2: WPA Version 24) Configure the encryption type.WEC8500/configure/wlan 1/security# [WPA_TYPE] [ENC_TYPE]Parameter DescriptionWPA_TYPE WPA type (wpa/wpa2): Use the same value as the WPA typeconfigured before. WPA Version 2 must be enabled at all times.- wpa: WPA Version 1- wpa2: WPA Version 2
