WEC8500/8050 Operation Manual Version 5.2Samsung Electronics America page 360 of 5338.7 Operator Authentication throughInteroperation with TACACS+ ServerA W-EP wireless LAN system provides an operator authentication function byinteroperating with an external TACACS+ server.8.7.1 Configuring External TACACS+ ServerA W-EP wireless LAN system provides an operator authentication function byinteroperating with an external TACACS+ server and the procedure detailed below iscarried out for interoperation with a TACACS+ server.8.7.1.1 Basic SettingsThe default configuration of the TACACS+ server is as follows:Configuration using CLI1) Go to configure security tacacs configuration mode of CLI.WEC8500# configure terminalWEC8500/configure# securityWEC8500/configure/security# tacacs 1WEC8500/configure/security/tacacs 1#2) Configure the IP address of the TACACS+ server.WEC8500/configure/security/tacacs 1# server-ip [IP_ADDRESS]Parameter DescriptionIP_ADDRESS IP address of the TACACS+ server3) Set the public key of the TACACS+ server.WEC8500/configure/security/tacacs 1# shared-secret [KEY_STRING]Parameter DescriptionKEY_STRING Public key of the TACACS+ server4) Configure the port number of the TACACS+ server.WEC8500/configure/security/tacacs 1# server-port [PORT_NUMBER]
