Samsung WEC8500 Operation Manual

Also see for WEC8050: Operation manual Operation manual Operation manual Operation manual Maintenance manual

Contents

WEC8500/8050 Operation Manual Version 5.2Samsung Electronics America page 253 of 5336.3 802.11h ConfigurationThe APC supports the configuration and transmission power limitation for the DynamicFrequency Selection (DFS) function in an AP. When the AP detects radar, an event is sentto the WEM and a detouring channel can be configured in the AP.Configuration using CLIFor channel switching announcement related configuration and power constraint valueconfiguration in an AP, execute the command as follows:1) Go to configure  80211h configuration mode of CLI.APC# configure terminalAPC/configure# 80211hAPC/configure/80211h#2) Configure the 802.11h information. channel-switch [MODE] [RESTRICTION] [SWITCH COUNT]Parameter DescriptionMODE Whether the switching announcement function is enabled/disabledRESTRICTION Whether the channel packet transmission restriction mode isenabled (disable/enable)SWITCH COUNT Waiting time until channel switching announcement3) Configure the transmission power of a wireless terminal. power-constraint [VALUE]Parameter DescriptionVALUE Transmission power(0-31 dB)4) To check the configuration information, use the ‘show 80211h configuration’ command.