Fax features2594. Special FeaturesFax features• For basic faxing features, refer to the Basic Guide (see "Basic faxing" onpage 67).• M267xN/M287xND does not support fax features.26Automatic redialingWhen the number you have dialed is busy or there is no answer when you senda fax, the machine automatically redials the number. The redial time depends onthe country's factory default setting.When the display shows Retry Redial?, press (Start) button to redial thenumber without waiting. To cancel the automatic redialing, press (Stop/Clear).To change the time interval between redials and the number of redial attempts.1 Press (fax) > (Menu)> Fax Setup > Sending on the controlpanel.2 Select Redial Times or Redial Term you want.3 Select the option you want.27Redialing the fax number1 Press (Redial/Pause) button on the control panel.2 Select the fax number you want.Ten recently sent fax numbers with ten received Caller IDs are shown.3 When an original is loaded in the document feeder, the machineautomatically begins to send.If an original is placed on the scanner glass, select Yes to add anotherpage. Load another original and press OK. When you have finished,select No when Another Page? appears.28Confirming a transmissionWhen the last page of your original has been sent successfully, the machinebeeps and returns to ready mode.When something goes wrong while sending your fax, an error message appearson the display. If you receive an error message, press (Stop/Clear) to clearthe message and try to send the fax again.
