Samsung Xpress M267x Series User Manual

Also see for M267x series: Installation guide Quick installation guide User guide Quick installation guide

Contents

Wireless network setup2123. Using a Network-Connected MachineBefore entering the IP address for the machine, you must know thecomputer’s network configuration information. If the computer’s networkconfiguration is set to DHCP, the wireless network setting should also beDHCP. Likewise, if the computer’s network configuration is set to Static, thewireless network setting should also be Static.If your computer is set to DHCP and you want to use Static wireless networksetting, you must contact the network administrator to get the static IPaddress.• For the DHCP methodIf the IP address assignment method is DHCP, check if DHCP is shown inthe Wireless Network Setting Confirm window. If it shows Static, clickChange TCP/IP to change the assignment method to Receive IPaddress automatically (DHCP).• For the Static methodIf the IP address assignment method is Static, check if Static is shown inthe Wireless Network Setting Confirm window. If it shows DHCP, clickChange TCP/IP to enter the IP address and other network configurationvalues for the machine.For example,If the computer’s network information is shown as follows:- IP address: 169.254.133.42- Subnet Mask: 255.255.0.0Then, the machine’s network information should be as shown below:- IP address: 169.254.133.43- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)- Gateway: 169.254.133.113 When the window that tells you that the network cable connection isconfirmed appears, disconnect the network cable and click Next..If the network cable is connected, it may have trouble finding themachine when configuring the wireless network.14 The wireless network connects according to the network configuration.15 Wireless network set up is completed. After installation is finished, clickQuit.After completing the wireless network connection, you need to install amachine driver to print from an application (see "Installation for Mac" onpage 152).18Using a network cableMachines that do not support the network port will not be able to use thisfeature (see "Rear view" on page 23).Your machine is a network compatible machine. To enable your machine towork with your network, you will need to perform some configurationprocedures.