Samsung Xpress M267x Series User Manual

Also see for M267x series: Installation guide Quick installation guide User guide Quick installation guide

Contents

3126. TroubleshootingCopying problemsCondition Suggested solutionsCopies are too light or too dark. Adjust the darkness in copy feature to lighten or darken the backgrounds of copies (see "Changing the settings for each copy" on page62).If the defect still appears aftercleaning the machine.set the Copy Feature > Adjust Bkgd. > Auto. (see "Menu overview" on page 33).Smears, lines, marks, or spotsappear on copies.• If the defects are on the original, adjust darkness in copy feature to lighten the background of your copies.• If there are no defects on the original, clean the scan unit (see "Cleaning the scan unit" on page 95).Copy image is skewed. • Ensure that the original is aligned with the registration guide.• The transfer roller may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page 89).Blank copies print out. Ensure that the original is face down on the scanner glass or face up in the document feeder.If these steps do not correct the problem, contact a service representative.Image rubs off the copy easily. • Replace the paper in the tray with paper from a new package.• In high humidity areas, do not leave paper in the machine for extended periods of time.Frequent copy paper jamsoccur.• Fan the paper, then turn it over in the tray. Replace the paper in the tray with a fresh supply. Check/adjust the paper guides, ifnecessary.• Ensure that the paper is the proper type and weight (see "Print media specifications" on page 125).• Check for copy paper or pieces of copy paper remaining in the machine after a paper jam has been cleared.Toner cartridge produces fewercopies than expected beforerunning out of toner.• Your originals may contain pictures, solids, or heavy lines. For example, your originals may be forms, newsletters, books, or otherdocuments that use more toner.• The scanner lid may be left open while copies are being made.• Turn the machine off and back on.