Using the TimersUsing the Sleep TimerMENU > System > Time > Sleep Timer Try NowThis function automatically shuts off the TV after a preconfigured period of time. Select System >Time > Sleep Timer. You can set the timer up to 180 minutes in 30-minute increments.Turning On the TV using On TimerMENU > System > Time > On Timer Try NowSet the On Timer so that the TV turns on automatically at a chosen time. You can set up threeseparate On Timer configurations concurrently: On Timer 1, On Timer 2, and On Timer 3. The OnTimer is only available if the Clock has been set.● SetupSelect Off, Everyday, Mon~Fri, Sat~Sun, or Manual. If you select Manual, you can select thedays you want the On Timer to turn on the TV by highlighting each day, and selecting it.● TimeSet the time that the TV turns on automatically. See Manual under Setting the Time for timesetting instructions.● VolumeSpecify the volume the TV will set itself to when it turns on.● SourceSelect a signal source from the list. This is the source the TV will access when it turns on. If youwant to use a USB device, that USB device must be connected to the TV before you start the OnTimer set up. To play back media from an HDMI or Component source such as a DVD player, Blu-ray player, or set-top-box, you must leave the device on. It must be on and playing when the TVturns on.● AntennaIf you have set the Source to TV, select a broadcast signal source, Air or Cable.● ChannelIf you have set the Source to TV, select a channel.● Music / PhotoIf you have set the Source to USB, specify a USB device folder containing music files in themusic field and/or a folder containing photos in the photo field. If you select a folder thatcontains music files and a folder that contains photo files, the TV plays the music files anddisplays the photos at the same time.
