Connecting to a Wireless Internet Network ManuallyMENU > Network > Network SettingsWith networks that require a static IP address, you will need to enter the IP address, subnet mask,gateway, and DNS values manually to connect to the network. To get the IP address, subnet mask,gateway and DNS values, contact your Internet Service Provider (ISP)." Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IPaddresses.11 On the Network Settings screen, set Network type to Wireless. The TV automatically displays alist of available wireless networks.Network SettingsSelect your network type.Network type WirelessWireless networkAP0000 You can connect your TV tothe internet. Please selectwhich wireless network touse.AP0001Add NetworkRefresh WPS (PBC)21 Select a network. If the network you want doesn’t appear in the list, select Add Network, andenter the network’s SSID (name) manually.31 Using the on-screen keyboard that appears, enter the password. When finished, select Done. Ifthe selected network is not security-enabled, the TV will by-pass the on-screen keyboard andattempt to connect right away.– To select a character on the on-screen keyboard, highlight the character and then select it.Select Caps to view capital letters. Select the 123#& key to view additional characters.– To view the security password as you enter it, select Show Password.41 Select Stop when the TV attempts to connect to the network. Once the network connection hasbeen interrupted, select IP Settings.Network SettingsConnection verification cancelled.Wireless network connection test is stopped.Change Network IP Settings Retry Close
