Important Information● NFC comes only with Android v4.12 Jellybean or later.– NFC is enabled only on Android 4.12 Jellybean or higher mobile devices. The NFC tag is alsorequired. For more information, refer to the mobile device's manual.– To enable NFC on mobile devices using operating systems earlier than Android 4.12 Jellybean,download the Samsung NFC Connection app from Google Play and install it on the device.The NFC tag is also required.● The connection may fail if the mobile device is not properly aligned with the NFC logo. If the"Empty tag" error appears on the mobile device, try again. Bring the mobile device close tothe Samsung Smart Control and position it so that its NFC antenna faces the NFC logo on theSamsung Smart Control. Samsung Smart Control so that the NFC antenna faces the NFC logo.● The NFC antenna's position depends on the device model. Locate the NFC antenna beforeproceeding.● A thick cellular-phone case may interrupt the connection between the two devices.● The Certification Mark is a trademark or registered trademark of NFC Forum, Inc. in the UnitedStates and in other countries.
