EnglishRecording settings53 How to set1 Display the screen as explained in"Displaying the recording settings screen". (P39)2 Set the timer-controlled recording.Example:• WEEK (start): Set MON.• WEEK (stop): Set WED.• START: Set 10:30am.• STOP: Set 8:30pm.• PROGRAM: Do not set.• FPS: Set 5 FPS.• SET: Set ON.1 Turn the J-dial, select "SAT", and then turn theS-dial clockwise.2 Turn the J-dial, change "SAT" to "MON", and turnthe S-dial clockwise.The hour indicator "– –" under START startsblinking.3 Turn the J-dial, select "10", and turn the S-dialclockwise.The minutes indicator "– –" under START startsblinking.4 Turn the J-dial, select "30", and turn the S-dialclockwise.The hour indicator "– –" under STOP starts blinking.5 Turn the J-dial, select "**", and turn the S-dialclockwise.All fields after STOP will display "**", and will nottake any input.The "DLY" line automatically switches to "TUE".6 Turn the J-dial, select "WED", and turn the S-dialclockwise.The hour indicator "– –" under STOP starts blinking.7 Turn the J-dial, select "20", and turn the S-dialclockwise.Repeat the same procedure to perform theremaining settings in the example.3 Press the EXIT/OSD button.4 Press the TIMER button.The TIMER indicator turns on, and the timer-controlledrecording goes into standby mode.• When the start time set for timer-controlledrecording comesThe REC/STOP indicator turns on, "REC" appearsin the operation display, and recording starts.• When the stop time set for timer-controlledrecording comesThe REC/STOP indicator turns off, the recordingstops.• Stopping a timer-controlled recording inprogressPress the TIMER button. The recording stops, theTIMER indicator turns off.• Playback during timer-controlled recording (P18)b Setting a program for timer-controlled recordingPerform the following settings to set a program after settingthe timer-controlled recording.Example:1 Turn the J-dial to select the desired PROGRAM(P-1), and then turn the S-dial clockwise.Since the program settings already include therecording rate, the FPS setting will show "****".Selections: P-1, P-2, P-3, P-42 Turn the J-dial, select "ON" under SET, and turn theS-dial clockwise.3 Press the EXIT/OSD button.F-2 Overlapping timer-controlled recordingMENU(J) (S) SET>WEEK START STOP PROGRAM FPS SETSUN --:-- --:-- OFF 12.5 FPS OFFMON --:-- --:-- OFF 12.5 FPS OFFTUE --:-- --:-- OFF 12.5 FPS OFFWED --:-- --:-- OFF 12.5 FPS OFFTHU --:-- --:-- OFF 12.5 FPS OFFFRI --:-- --:-- OFF 12.5 FPS OFFSAT --:-- --:-- OFF 12.5 FPS OFFDLY --:-- --:-- OFF 12.5 FPS OFFEXT ***** ***** OFF 12.5 FPS OFF6.TIMER SET2.RECORD SETMON 10:30 **:** *** **** FPS ***WED **:** 20:30 OFF 5 FPS ONEXIT/OSDTIMER01-01-06 00:00:00 REC REPEAT EN A ARCHIV 0001REC/STOPTUE **:** 20:30 P-1 **** FPS ONEXIT/OSD
