EnglishRecording settings59How to set1Set "TIME PERIOD A" and "TIME PERIOD B" using2Display the screen asexplained in "Displaying the recording settingsscreen", and then turn the S-dial clockwise. (P39)The "OFF" field of ALARM RECORDING startsblinking.3Display the motion sensor screen1Turn the J-dial to select "ENABLED" for ALARMRECORDING, and then turn the S-dial clockwise.2Turn the J-dial, select ALARM TRIGGER, andturn the S-dial clockwise.Selections:ALARM/SENSOR/ALARM AND SENSOR/ALARMOR SENSOR3Turn the J-dial to select "SENSOR", and thenturn the S-dial twice clockwise.The motion sensor screen is displayed.4Set the SENSOR.Example:•Camera number selection: Channel 3 (CH03)•Time period A: T-1•LEVEL: 2•MODE (detection method): A AND B1Press camera selection button 3.The channel display changes to "CH03".2Turn the J-dial to move the cursor to the desiredsensor location, and then turn the S-dialclockwise.3Turn the J-dial, set the sensor to "A", and turnthe S-dial clockwise.When "A" is accepted, the cursor moves to the right,to the next position.Repeat the procedure to move the cursor, and setthe sensor forAandB.4Turn the J-dial to move the cursor to the timeperiod selection "T-1", and then turn the S-dialclockwise.The "T-1" indicator starts blinking.5Turn the J-dial to select "T-2", and then turn theS-dial twice clockwise.The "OFF" indicator of LEVEL starts blinking.6Turn the J-dial to select LEVEL to "2", and thenturn the S-dial twice clockwise.The "A" field of MODE starts blinking.7Turn the J-dial, select the "A AND B" for MODE,and then turn the S-dial clockwise.When detection method is accepted, the cursormoves to the upper left position.5Set the following contents using the sameprocedure•Channel number display•Time period•LEVEL•MODE6To exit, turn the S-dial counterclockwise.Operation returns to the screen.G-5Motion sensor settingMENU(J)(S)RECMODESET>ALARMRECORDING:OFFPICTUREQUALITY:ENHANCEDAUDIORECORDING:ONALARMINTERLEAVE:ONLY7.ALARM REC MODE SET2.RECORD SET3CH01CH03The LEVEL and MODE settings can be different for thetime periods (T-1, T-2, T-3 and T-4) of TIME PERIOD A,but the location of the motion sensor is fixed. Themotion sensor cannot be set to different locations forthe different time periods.ABCH03T-2LEVEL:2MODE:AANDBAAAAAAAAAAAAAAAAAAAABBBBBBBBBBBBBBBB1 467(S)
