![Sanyo PLC-WL2500 - 2500 Lumens Manual Manual pdf 60 page image](https://manuals-archive2.s3.amazonaws.com/5594790/3f015409f2468db64cfdfc359c458bf360f.jpg)
PLC-WL2500 / WL2501 Expand Serial Command Functional Specifications59/729.9 Lamp Status Read Command9.9.1 CR_LAMPREPL CommandCommand “CR_LAMPREPL”[CR]Details Get information of Lamp Replacement timeResponseAcceptable “000_%1”[CR]%1“1Y” -------------------------- Over lamp replacement time“1N” -------------------------- Within lamp replacement time“1” means the number of lamps.(1 lamp model→ “1”)“Y”/”N” means if it has reached its replacement time or not.e.g. “1Y” -----------projector is 1 lamp model and Lamp is over itsreplacement timeUnacceptable “Error code”[CR]9.9.2 CR_LAMPH CommandCommand “CR_LAMPH”[CR]Details Get total running time of lamp by hour (h)*Actual running time, not corresponding valueResponseAcceptable “000_%1”[CR]%1 “00000”~“99999”Unacceptable “Error code”[CR]9.9.3 CR_LAMPCORRESPH CommandCommand “CR_LAMPCORRESPH”[CR]Details Get total running time of lamp by hour (h)* Corresponding value, not actual running timeResponseAcceptable “000_%1”[CR]%1 “00000”~“99999”Unacceptable Error code”[CR]9.9.4 CR_LAMPMODE CommandCommand “CR_LAMPMODE”[CR]Details Get setting status of Lamp ModeResponseAcceptable “000_%1”[CR]%1 “NORMAL” -------------- Lamp Mode is Normal“ECO” -------------------- Lamp Mode is EcoUnacceptable “Error code”[CR]