Sanyo PLC-WL2503 - 2500 Lumens Manual

Also see for PLC-WL2500: Command list Owner's manual Manual Manual Owner's manual

Contents

Sanyo PLC-WL2503 - 2500 Lumens Manual Manual pdf 41 page image

PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications40/728.10.21 CF_PTIME CommandCommand “CF_PTIME_%1”[CR]%1 “001” ~ “180” -----------Directly specify the time by minutes.DetailsSet Countdown timer for P-timer function.The status set by this command is stored in EEPROM and its setting is effectiveafter ALL is OFFThis command is available in normal Power ON status.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.10.22 CF_CCAPTIONDISP CommandCommand “CF_CCAPTIONDISP_%1”[CR]%1“OFF” ------------- Select Off“CC1” ------------- Select CC1“CC2” ------------- Select CC2“CC3” ------------- Select CC3“CC4” ------------- Select CC4DetailsSelect channel of Closed caption.The status set with this command is stored in EEPROM and its setting is effectiveeven after ALL is OFF.This command is available in normal Power ON status.Note)Closed caption is available under conditions below;Entered signal is appropriate (Video, NTSC signal of S-video) and System is fixedto NTSC.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.10.23 CF_CCAPTIONCOLOR CommandCommand “CF_CCAPTIONCOLOR_%1”[CR]%1 “COLOR” ------- Select Color“WHITE” -------- Select WhiteDetailsSelect color of Closed caption.The status set with this command is stored in EEPROM and its setting is effectiveeven after ALL is OFF.This command is available in normal Power ON status.Note)Closed caption is available under conditions below;Entered signal is appropriate (Video, NTSC signal of S-video) and System is fixedto NTSC.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]