Sanyo PLC-WL2503A Owner's Manual

Also see for PLC-WL2503A: Manual Manual Service manual Dimensional drawing Specifications

Contents

Sanyo PLC-WL2503A Owner's Manual Manual pdf 22 page image

22Main MenuFor detailed functions of each menu, see “Menu Tree” on pages 68-69.①②③④⑤⑥⑦⑧Main Menu Sub-Menu⑨⑩③ Image selectFor computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green),Colorboard and Image 1-4. (p.33)For video or HDMI source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green),Colorboard and Image 1-4. (p.40)④ Image adjustFor computer source, used to adjust computer image [Contrast, Brightness, Color temp , White balance (Red/Green/Blue), Sharpness and Gamma]. (pp.34-35)For video or HDMI source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp , Whitebalance (Red/Green/Blue), Sharpness, Gamma, Noise reduction and Progressive]. (pp.41-42)② PC adjustSelect Auto PC adj , Fine sync, Total dots, Horizontal, Vertical, Current mode, Clamp, Display area H and Displayarea V to adjust the parameters to match with the PC input signal format. (pp.30-32)⑤ ScreenFor computer source, used to adjust size of the image [Normal, True, Full, Custom and Digital zoom +/– ]. (pp.35-36)For video or HDMI source, used to set size of image [Normal, Full, Zoom, Wide, Natural wide and Custom]. (p.43)① InputUsed to select an input source from Computer 1, Computer 2, HDMI, Video or S-video. (pp.27-28,37-38)⑥ SoundUsed to adjust the volume or mute the sound. (p.24)⑧ InformationDisplay the input source information: Input , H-sync freq , V-sync freq , Screen, Language, Lamp status, Lampcounter, Power management, Key lock, PIN code lock and Remote control (p.59)⑩ GuideThe key operation is displayed.⑦ SettingUsed to set the projector’s operating configurations. (pp.44-58)⑨ NetworkSee owner’s manual of “Network Set-up and Operation”.Basic Operation