Sanyo PLC-WL2503A Owner's Manual

Also see for PLC-WL2503A: Manual Manual Service manual Dimensional drawing Specifications

Contents

Sanyo PLC-WL2503A Owner's Manual Manual pdf 30 page image

30Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal , Verticalposition to conform to your computer.PC adjust MenuAuto PC adjustmentTo store adjustment parametersThe adjusted parameters from the Auto PC adjustment canbe stored in the projector. Once the parameters are stored,the setting can be done just by selecting a Mode (1-10) inthe PC System Menu (see page 29). See also “Store” onpage 32.Note:• Fine sync, Total dots, Horizontal and Verticalposition of some computers can not be fully adjustedwith the Auto PC adjustment function. When the imageis not provided properly with this operation, manualadjustments are required (pp.31-32).• The Auto PC adjustment can not be operated when480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selectedin the PC System Menu (p.29) , or when the signal iscoming from the HDMI terminal.Press the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select PC adjustand then press the Point ► or the SELECT button.12 Use the Point ▲▼ buttons to select Auto PC adj andthen press the SELECT button.Auto PC adjUse Point ▲▼ buttons to select Auto PCadj and press the SELECT button.Please wait appears while the Auto PCadjustment is in process.Computer InputMenu Operation