Sanyo PLC-WL2503A Owner's Manual

Also see for PLC-WL2503A: Manual Manual Service manual Dimensional drawing Specifications

Contents

Sanyo PLC-WL2503A Owner's Manual Manual pdf 74 page image

74AppendixModel No.SCART-VGA Cable : POA-CA-SCARTCOMPONENT-VGA Cable : POA-CA-COMPVGAVGA-Cable (10 m) : KA-MC-DB10TERMINAL COVER : POA-TC-WL2500The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the salesdealer.Optional PartsThe Terminal Panel ReplacementFig. 1Fig. 2Fig. 3Terminal Cover AttachmentFive(5) screwsTerminal CoverTwo(2) screwsTerminal Panel12Remove the five (5) screws and pull outthe terminal panel. (Fig.1)Attach the terminal cover attachmentand make sure that it is set properly andsecure the five (5) screws. (Fig 2)3 Connect the cables from the peripheralequipment to the projector.Note: Make sure to secure the screws toprevent the terminal cover from falling off.It is recommended to attach the terminal cover to hide the unsightly cables when hanging theprojector from the ceiling. The optional terminal cover set (including Terminal Cover, Terminal CoverAttachment and two (2) Screws) is sold separately. Please contact sales dealer where you purchasedthe projector.4 Push in the terminal cover and secure thetwo (2) screws. (Fig 3)CAUTIONDo not touch or remove any parts exceptfor the terminal panel and the five (5)screws. It may result in malfunctions,electrical shock, fire hazard or otheraccidents.