Sanyo PLC-WL2503A Owner's Manual

Also see for PLC-WL2503A: Manual Manual Service manual Dimensional drawing Specifications

Contents

Sanyo PLC-WL2503A Owner's Manual Manual pdf 26 page image

26Press the NO SHOW button on the remote control to blackout the image. To restore to normal, press the NO SHOWbutton again or press any other button. When the projectedimage is captured and is set as User in the Logo selection(p.47), the screen changes each time you press the NOSHOW button as follows.black out → the captured image → normal → • • • • •NO SHOW buttonPress the P-TIMER button on the remote control to operatethe Count up/Count down function. Refer to p.52 for detail ofSetting for the P-timer function.To stop the count time, press the P-TIMER button.To cancel the P-timer function, press and hold the P-TIMERbutton for a few seconds.P-TIMER buttonPress the IMAGE button on the remote control to select adesired image mode of the screen. See pages 33, 40 fordetails.IMAGE buttonNo show disappears after 4 seconds.Note:See the previous page for the description ofother buttons.HDMIASPECTIMAGE buttonNO SHOW buttonP-TIMER buttonSCREEN buttonSelect the screen size (See pages 35-36, 43 for details).SCREEN buttonBasic OperationRemote ControlNote:When use the MUTE button to release the No Show function,the mute function can not be operated at the same time.