Sanyo PLC-WL2503A Owner's Manual

Also see for PLC-WL2503A: Manual Manual Service manual Dimensional drawing Specifications

Contents

Sanyo PLC-WL2503A Owner's Manual Manual pdf 40 page image

40HDMIASPECTImage select MenuSelect the desired image mode from among Dynamic,Standard, Cinema, Blackboard (Green), Colorboard,Image 1, Image 2, Image 3, and Image 4 by pressing theIMAGE button on the remote control.StandardPicture mode adjusted with fine tone.CinemaBlackboard (Green)Image 1-4IMAGE buttonDynamicCinemaImage Mode SelectionFor the image projected on a blackboard.This mode helps enhance the image projected on ablackboard. This is mainly effective on a green coloredboard, not truly effective on a black colored board.Blackboard (Green)DynamicStandardRemote ControlIMAGE buttonFor viewing pictures in a bright room.Normal picture mode preset on the projector.For viewing with the user preset image mode in the Imageadjust Menu (see pages 41-42).12Image 1Image 2Image 3Image 4ColorboardColorboardPress the Point ► button at Colorboard, and then use thePoint ▲▼ buttons to switch the desired item (Red, Blue,Yellow, Green) and then press the SELECT button.At the time of simple projection on the colored wall, you canget the close color image to the color image projected on awhite screen by selecting the similar color to the wall colorfrom the preset four colors.Press the MENU button to display the On-Screen Menu.Use the Point ▲▼ buttons to select Image select andthen press the Point ► or the SELECT button.Use the Point ▲▼ buttons to select the desired itemand then press the SELECT button.Video InputDirect OperationMenu Operation