Sanyo PLC-XD2200 Owner's Manual

Also see for PLC-XD2200: Owner's manual Easy setup Manual Manual Command list

Contents

14InstallationConnecting to a ComputerUnplug the power cords of both the projector and external equipment from the AC outlet before connectingcables.Cables used for connection• VGA Cables (Mini D-sub 15 pin) *(Only one cable is supplied.)• Audio Cables(*One cable is supplied; other cables are not supplied with the projector.)✔Note:• Input sound to the AUDIO IN terminal when using the COMPUTER IN 1/ S-VIDEO IN / COMPONENT INand the COMPUTER IN 2/MONITOR OUT terminals as input.• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.• When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 /S-VIDEO IN /COMPONENT IN andnot the COMPUTER IN 2/MONITOR OUT.External Audio EquipmentAudio cable(stereo)Audio cable(stereo)Audio OutputAUDIO INAUDIO OUT(stereo)Audio InputMonitor InputorMonitor OutputCOMPUTER IN 2 /MONITOR OUTVGAcableCOMPUTER IN 1/ S-VIDEO IN/COMPONENT INVGAcableMonitorOutputThis terminal is switchable.Set up the terminal aseither Computer input orMonitor output. (See Page49.)Downloaded From projector-manual.com Sanyo Manuals