Sanyo PLC-XD2200 Owner's Manual

Also see for PLC-XD2200: Owner's manual Easy setup Manual Manual Command list

Contents

7Video InputChoose Computer 1(Component) or Computer 1(Scart) by pressing the COMPONENT or the COMPUTER 1button on the remote control.Before using these buttons, correct input source should be selected through Menu operation as describedbelow.1Input Menu2 Use the Point ▲▼ buttons to select Computer 1 andthen press the Point ► button.Input Source Selection (Component, RGB Scart 21-pin)When the input source is coming from videoequipment connected to the COMPUTERIN 1/S-VIDEO IN/COMPONENT IN terminalwith a Component-VGA Cable, selectComponent.ComponentWhen the input source is coming from videoequipment connected to the COMPUTERIN 1/S-VIDEO IN/COMPONENT IN terminalwith a Scart-VGA Cable, select RGB(Scart).RGB (Scart)Press the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Input andthen press the Point ► or the SELECT button.✔Note:When the Input Search function is set to On1 or On2,the input signal will be searched automatically (p.44).COMPUTER 1 buttonRemote Control Use the Point ▲▼ buttons to select Component orRGB(Scart) and then press the SELECT button.S-videoComputer 1(RGB)Computer 1(Scart)COMPONENT buttonComputer 1(Component)Direct OperationMenu OperationDownloaded From projector-manual.com Sanyo Manuals