Sanyo PLC-XD2200 Owner's Manual

Also see for PLC-XD2200: Owner's manual Easy setup Manual Manual Command list

Contents

9Video InputImage select MenuSelect the desired image mode among Dynamic, Standard,Cinema, Blackboard (Green), Colorboard, Image 1,Image 2, Image and Image 4 by pressing the IMAGEbutton on the remote control.StandardPicture mode adjusted with fine tone.CinemaBlackboard (Green)Image 1–4IMAGE buttonDynamicCinemaImage Mode SelectionFor the image projected on a blackboard.This mode help enhance the image projected on ablackboard. This is mainly effective on a green coloredboard, not truly effective on a black colored board.Blackboard (Green)DynamicStandardRemote ControlIMAGE buttonFor viewing pictures in a bright room.Normal picture mode preset on the projector.For viewing with the user preset image mode in the ImageAdjust Menu (see pages 40-41). This Image memory isprovided in each computer, scart, component, S-video andvideo input source.12 Image 1Image 2Image Image 4ColorboardColorboardAt the time of simple projection on the colored wall, youcan get the close color image to the color image projectedon a white screen by selecting the similar color to the wallcolor from the preset four colors.Press the MENU button to display the On-Screen Menu.Use the Point ▲▼ buttons to select Image select andthen press the Point ► or the SELECT button.Use the Point ▲▼ buttons to select the desired itemand then press the SELECT button .►Direct OperationMenu OperationDownloaded From projector-manual.com Sanyo Manuals