Sanyo PLC-XD2200 Owner's Manual

Also see for PLC-XD2200: Owner's manual Easy setup Manual Manual Command list

Contents

5Computer InputSelect Digital zoom +. The On-Screen Menu disappears andD zoom + appears. Press the SELECT button to expand theimage size. Use the Point ▲▼◄► buttons to pan the image.The Panning function can work only when the image is largerthan the screen size.A projected image can be also expanded by pressing theD.ZOOM ▲ or the SELECT button on the remote control.To exit the Digital zoom +/– mode, press any button exceptthe D.ZOOM ▲▼ buttons, SELECT and Point buttons.Digital zoom +Select Digital zoom –. The On-Screen Menu disappears andD zoom – appears. Press the SELECT button to compressimage size.The projected image can be also compressed by pressing theD.ZOOM ▼ or the SELECT button on the remote control.Digital zoom –To return to the previous screen size, select a screen sizefrom the Screen Size Adjustment Menu or select an inputsource from the Input Source Selection Menu (see page27) again, or adjust the screen size with the D.ZOOM ▲▼buttons.For zooming in and out the images✔Note:• The minimum compression ratio is limiteddepending on the input signal, when theKeystone function is working or when thecustom is selected for the screen size.• True, Full, and Digital zoom +/– cannotbe selected when 480i, 575i, 480p or575p is selected in the PC System Menu(p.28).• Digital zoom +/- cannot be selectedwhen Full or True is selected.• When Custom is selected, the Digitalzoom - function is disabled.Remote ControlD ZOOM + buttonPOINT buttonsSELECT buttonD ZOOM - buttonAdjust the screen scale and position manually with thisfunction.Press the Point ►button at Custom adj. and the Customadjustment menu is displayed on the screen, you can usethe Point ▲▼ buttons to choose the item you want to adjust.Scale H/V .......... Adjust the Horizontal/Vertical screenscale.H&V ................... When set to On, the aspect ratio isfixed. The Scale V appears dimmed andbecomes unavailable. Adjust Scale H,then the screen scale is automaticallymodified based on the aspect ratio.Position H/V ..... Adjust the Horizontal/Vertical screenposition.Common ........... Save the adjusted scale or position to allthe inputs. Press the SELECT button atCommon to display a confirmation box.To save the scale or position, press theSELECT button at yes. When Customis selected, the saved scale or position isused.Reset ................. Reset the all adjusted values. Pressthe SELECT button at Reset to displaya confirmation box. To reset, press theSELECT button at yes.Custom adj✔Note:• When no signal is detected, Normal is setautomatically .• The adjustable range for Scale H/V andPosition H/V is limited depending on theinput signal.►adj.Downloaded From projector-manual.com Sanyo Manuals