Sanyo PLC-XF46E Owner's Manual

Also see for PLC-XF46E: Owner's manual Specifications Service manual

Contents

10PREPARATIONPICTURE LEVEL AND TILT ADJUSTMENTPicture tilt and projection angle can be adjusted withhandles on both sides of a projector. Projection anglecan be adjusted to 5.7 degrees upper way.123LEVEL AND TILTADJUST HANDLEADJUSTABLEFEETHeight of front feet can be adjustedby turning handles.KNOBPress knob on handle. Handle pop out.Turn handles (right and left) until picture is projected onproper position. Adjust height of rear adjustable feet byrotating them until projector properly stabled on table.Press knob and retract handle.REAR ADJUSTABLEFEET. (Refer to P7).INSTALLING PROJECTOR IN PROPER POSITIONInstall the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard.Do not tilt the projector more than 10 degrees above and below.Do not point the projector up to project an image.Do not point the projector down to project an image.Do not put the projector on either side to project an image.NO UPWARDNO DOWNWARDNO SIDEWAYS10˚10˚