Sanyo PLC-XF46E Owner's Manual

Also see for PLC-XF46E: Owner's manual Specifications Service manual

Contents

34VIDEO INPUTPress MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon.Press POINT DOWN button to move a red arrow pointer to Input3 and then press SELECT button. Source Select Menu willappear.12Move a pointer to source andpress SELECT button.Source Select Menu (VIDEO)Move a pointer to source that you want to select and then pressSELECT button.3When video input signal is connected to VIDEO jack,select Video.VideoWhen video input signal is connected to S-VIDEO jack,select S-Video.S-VideoWhen video input signal is connected to VIDEO/Y, Cjacks, select Y/C.Y/CWhen connecting to those equipment, select a type of Videosource in SOURCE SELECT (VIDEO) Menu.WHEN SELECT INPUT 3 (AV TERMINAL )Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon.Move a pointer to "Y, Pb/Cb, Pr/Cr" and then press SELECTbutton.13When connect component video output (Cr, Y, Cb or Pr, Y, Pb) fromvideo equipment to R/Pr, G/Y and B/Pb jacks.WHEN SELECT INPUT 2 (5 BNC SLOT )Input 2INPUT MENUMove a pointer toY, Pb/Cb, Pr/Cr and pressSELECT button.INPUT Menu iconMove a pointer (red arrow) toInput 2 and press SELECTbutton.Source Select MenuInput 3INPUT MENUINPUT Menu iconMove a pointer (red arrow) toInput 3 and press SELECTbutton.Press POINT DOWN button to move a red arrow pointer to Input2 and then press SELECT button. Source Select Menu willappear.2SELECTING INPUT SOURCEMENU OPERATIONDIRECT OPERATIONSelect INPUT source by pressing INPUT 1/2, INPUT 3/4 orINPUT 1 - INPUT 4 buttons on Side Control or on RemoteControl Unit.Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to select Input and press SELECTbutton. Another dialog box INPUT SELECT Menu will appear.1INPUT 1/2 buttonINPUT 1INPUT 2INPUT 3/4 buttonINPUT 3INPUT 4INPUT Menu iconPress POINT DOWN button to move arrow to INPUT source thatyou want to select, and then press SELECT button.2