Sanyo PLC-XF46E Owner's Manual
Also see for PLC-XF46E: Owner's manualSpecificationsService manual
                                                                | |
Contents
|
- 5 -E7 Adjust focus of the Projection Lens. (LNS-W01, LNS-W01Z, LNS-T01, LNS-T01Z and LNS-W03 only.)Set up the projector and project image on the screen. Loosen Focus Lens Lock Screw and rotateProjection Lens to obtain proper focus. After adjusting focus, be sure to lock Projection Lens with FocusLens Lock Screw securely. (See Fig. 4.) Adjust focus of Projection Lens MODEL LNS-W03, followingFocus Adjustment on page 6.8 Replace Lower Lens Cover. Slide Light-Block Sheets into the guide of Lower Lens Cover and set themin front of the flap. (See Fig. 9.) Fix Lower Lens Cover with 4 Screws C. (See Fig. 2.)9 Replace Upper Lens Cover. Slide Light-Block Sheets into the guide of Upper Lens Cover and set themin front of the flap. (See Fig. 9.) Fix Upper Lens Cover with 2 Screws A. (See Fig. 1.)10 Turn the projector on and operate Lens shift, Zoom and Focus fully to check Light-Block Sheets.If Light-Block Sheets interfere with those operations, check Light-Block Sheets are set properly.Fig-9LOWER LENSCOVERUPPER LENSCOVERLIGHT-BLOCKSHEETSFLAP Slide into frontof the flap.Slide into frontof the flap.FLAPSlide both upper sides of LIGHT BLOCKSheets in between and .21CABINETGUIDE12 |
Related manuals for Sanyo PLC-XF46E
manualsdatabase
Your AI-powered manual search engine