2CAUTION : TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER (ORBACK). NO USER-SERVICEABLE PARTSINSIDE EXCEPT LAMP REPLACEMENT.REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.THIS SYMBOL INDICATES THAT DANGEROUSVOLTAGE CONSTITUTING A RISK OF ELECTRICSHOCK IS PRESENT WITHIN THIS UNIT.THIS SYMBOL INDICATES THAT THERE AREIMPORTANT OPERATING AND MAINTENANCEINSTRUCTIONS IN THE OWNER’S MANUAL WITHTHIS UNIT.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENBefore operating this projector, read this manual thoroughlyand operate the projector properly.This projector provides many convenient features andfunctions. Operating the projector properly enables you tomanage those features and maintain it in better condition for aconsiderable time.Improper operation may result in not only shortening theproduct life, but also malfunctions, fire hazard, or otheraccidents.If your projector seems to operate improperly, read thismanual again, check operations and cable connections and trythe solutions in the “Troubleshooting” section in the end of thisbooklet. If the problem still persists, contact the dealer whereyou purchased the projector or the service center.Safety PrecautionWARNING : TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS APPLIANCETO RAIN OR MOISTURE.– This projector produces intense light from the projectionlens. Do not stare directly into the lens as much aspossible. Eye damage could result. Be especially carefulthat children do not stare directly into the beam.– Install the projector in a proper position. If not, it may resultin a fire hazard.– Provide appropriate space on the top, sides and rear of theprojector cabinet for allowing air circulation and cooling theprojector. Minimum clearances must be maintained. If theprojector is to be built into a compartment or similarlyenclosed, the minimum distances must be maintained. Donot cover the ventilation slot on the projector. Heat build-upcan reduce the service life of your projector, and can alsobe dangerous.– If the projector is not to be used for an extended time,unplug the projector from the power outlet.NOTE: This symbol mark and recycle system are applied onlyto EU countries and not applied to the countries in theother area of the world.Your SANYO product is designed andmanufactured with high quality materialsand components which can be recycledand reused.This symbol means that electrical andelectronic equipment, at their end-of-life,should be disposed of separately fromyour household waste.Please dispose of this equipment at your local communitywaste collection/recycling centre.In the European Union there are separate collection sys-tems for used electrical and electronic products.Please help us to conserve the environment we live in!CAUTION ON HANGING FROM THE CEILINGWhen hanging the projector from the ceiling,clean the air intake vents, air filters, and topof the projector periodically with a vacuumcleaner. If you leave the projector withoutcleaning for a long time, the dust will block theoperation of the cooling function, and it maycause a breakdown or a disaster.DO NOT SET THE PROJECTOR IN GREASY, WET, ORSMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENTA BREAKDOWN OR A DISASTER. IF THE PROJECTORCOMES IN CONTACT WITH OIL OR CHEMICALS, IT MAYBECOME DETERIORATED.READ AND KEEP THIS OWNER'S MANUAL FOR LATERUSE.3.3' (1m)3.3' (1m) 3.3' (1m) 3.3' (1m)SIDE and TOP REARTO THE OWNER