Sanyo PLC-XF46N/E Owner's Manual

Also see for PLC-XF46E: Specifications Owner's manual Service manual

Contents

28COMPUTER INPUTPC ADJUSTMENTAUTO PC ADJUSTMENTAuto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to yourcomputer. Auto PC Adjustment function can be operated as follows.Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer to PCADJUST Menu icon.12 Press POINT DOWN button to move a red frame pointer toAUTO PC Adj. icon and then press SELECT button twice.This Auto PC Adjustment can be also executed by pressingAUTO PC ADJ. button on Side Control or on Remote ControlUnit. Move a red frame pointer to AUTO PCAdj. icon and press SELECT button.PC ADJUST MENUAuto PC Adj.PC ADJUST Menu iconStore adjustment parameters.Adjustment parameters from Auto PC Adjustment can be memorizedin this projector. Once parameters are memorized, setting can bedone just by selecting Mode in PC SYSTEM Menu (P27). Refer tostep 3 of MANUAL PC ADJUSTMENT section (P30).NOTE● Fine sync, Total dots and Picture Position of some computers cannot be fully adjusted with this Auto PC Adjustment function. Whenimage is not provided properly through this function, manualadjustments are required. (Refer to page 29, 30.)● Auto PC Adjustment function cannot be operated in Digital Signalinput on DVI terminal and “480i”, “575i”, “480p”, “575p”, “720p(HDTV)”, “1035i (HDTV)”, “1080i/50 (HDTV)” or “1080i/60 (HDTV)”is selected on PC SYSTEM Menu (P27).