Sanyo PLC-XF46N/E Owner's Manual

Also see for PLC-XF46E: Specifications Owner's manual Service manual

Contents

8PREPARATIONSETTING-UP PROJECTORThis projector uses nominal input voltages of 120 V or200-240 V AC. This projector automatically selectscorrect input voltage. It is designed to work with single-phase power systems having a grounded neutralconductor. To reduce risk of electrical shock, do not pluginto any other type of power system.Consult your authorized dealer or service station if youare not sure of type of power supply being in use.Connect a projector with peripheral equipment beforeturning a projector on. (Refer to pages 13 ~ 16 forconnection.)CONNECTING AC POWER CORDConnect AC Power Cord (supplied) toa projector.AC outlet must be near this equipmentand must be easily accessible.To POWER CORDCONNECTOR on aprojector.Projector side AC Outlet sideGroundNOTE ON POWER CORDAC Power Cord must meet requirement of country where you use a projector.Confirm AC plug type with chart below and proper AC power cord must be used.If supplied AC Power Cord does not match AC outlet, contact your sales dealer.To the AC Outlet.(120 V AC)For Continental EuropeFor the U.S.A. and Canada For the U.K.To the AC Outlet.(200 - 240 V AC)To the AC Outlet.(200 - 240 V AC)