Sanyo PLC-XF46N/E Owner's Manual

Also see for PLC-XF46E: Specifications Owner's manual Service manual

Contents

46APPENDIXThis projector uses a high-pressure lamp which must be handled carefully and properly. Improperhandling may result in accidents, injury, or create a fire hazard.● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is noguarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in ashorter period of time than other similar lamps.● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE INDICATORlights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuoususe of the lamp with the LAMP REPLACE INDICATOR lighted may increase the risk of lamp explosion.● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as itslifetime draws to an end. Risk of explosion may differ according to the environment or conditions inwhich the projector and lamp are being used.IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact anauthorized service station for a checkup of the unit and replacement of the lamp. Additionally, checkcarefully to ensure that there are no broken shards or pieces of glass around the projector or coming outfrom the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No oneshould check the inside of the projector except those who are authorized trained technicians and who arefamiliar with projector service. Inappropriate attempts to service the unit by anyone, especially those whoare not appropriately trained to do so, may result in an accident or injury caused by pieces of brokenglass.LAMP HANDLING PRECAUTIONSSERVICEWARNING: High voltages are used to operate this projector. Do not attempt to open cabinet.You can often correct operating problems yourself. If a projector fails to work properly, see "TROUBLESHOOT-ING" section on page 47. To correct failure, try "Solutions".If after following all operating instructions, you find that service is necessary, contact Sanyo Service Station orstore where you purchased unit.Give model number and explain difficulty. We will advise you how to obtain service.This symbol on the nameplate means the product is Listed by UnderwritersLaboratories Inc. It is designed and manufactured to meet rigid U.L. safetystandards against risk of fire, casualty and electrical hazards.The CE Mark is a Directive conformity mark of the European Community (EC).Pixelworks ICs used.