Sanyo PLC-XF46N/E Owner's Manual

Also see for PLC-XF46E: Specifications Owner's manual Service manual

Contents

37VIDEO INPUTPress POINT LEFT/RIGHT buttonsto adjust value.Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button(s) to move a red frame pointer toIMAGE ADJUST Menu icon.12 Press POINT DOWN button to move a red frame pointer to itemthat you want to adjust and then press SELECT button. Level ofeach item is displayed. Adjust each level by pressing POINTLEFT/RIGHT button(s).Move a red frame pointer toitem to be selected and thenpress SELECT button.IMAGE ADJUST MENUIMAGE LEVEL ADJUSTMENTPress POINT LEFT button to decrease contrast, and POINT RIGHTbutton to increase contrast. (From 0 to 63.)Press POINT LEFT button to adjust image darker, and POINTRIGHT button to adjust brighter. (From 0 to 63.)ContrastBrightnessPress either POINT LEFT button or POINT RIGHT button to obtainbetter balance of contrast. (From 0 to 15.)GammaPress SELECT button at this icon todisplay other items.IMAGE ADJUSTMenu iconPress POINT LEFT/RIGHT buttonsto adjust value.Press POINT LEFT button to lighten color, and POINT RIGHT buttonto deeper color. (From 0 to 63.)Press POINT LEFT button or POINT RIGHT button to obtain propercolor. (From 0 to 63.)ColorTintPress POINT LEFT button to soften image, and POINT RIGHTbutton to sharpen image. (From 0 to 15.)SharpnessPress POINT LEFT button to lighten red tone and POINT RIGHTbutton to deeper tone. (From 0 to 63.)White balance (Red)Press POINT LEFT button to lighten green tone and POINT RIGHTbutton to deeper tone. (From 0 to 63.)White balance (Green)Press POINT LEFT button to lighten blue tone and POINT RIGHTbutton to deeper tone. (From 0 to 63.)White balance (Blue)Press SELECT button at this icon tostore value.Press SELECT button at this icon todisplay previous items.Press POINT LEFT/RIGHT button(s) to change progressive scanmode. Dialog box display is changed to “Off” and progressive scanmode to off. Press POINT LEFT/RIGHT button(s) again, progressivescan mode to on.Press POINT LEFT/RIGHT button(s) to change noise reductionmode. Dialog box display is changed to “On” to reduce noise (roughparts) of image. Press POINT LEFT/RIGHT button(s) again, tochange noise reduction mode to off.Noise reductionProgressiveNOTE :Tint cannot be adjusted when video system is PAL,SECAM, PAL-M or PAL-N.Progressive cannot be operated when “480p”,“575p” or “720p” is selected on AV SYSTEMMENU (P35).Color temp.Press either POINT LEFT button or POINT RIGHT button to Colortemp. level that you want to select. (XLow, Low, Mid or High)