26Basic OperationFor detailed functions of each menu, see “Menu Tree” on pages 73-75.MNOPQRSTMain Menu Sub-MenuUVO Image selectFor computer source, used to select an image level among Standard, Real, and Image 1-10 (p.40).For Video source, used to select an image level among Standard, Cinema, and Image 1-10 (p.46).P Image adjustFor computer source, used to adjust the computer image. [Contrast/Brightness/Color temp./White balance (R/G/B)/Offset(R/G/B)/Sharpness/Gamma/Reset/Store] (pp.41-42).For Video source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color temp./White balance (R/G/B)/Offset (R/G/B)/Sharpness/Gamma/Noise Reduction/Progressive/Reset/Store] (pp.47-48).N PC adjustUsed to adjust the parameters to match with the input signal format (pp.37-39).Q ScreenFor computer source, used to adjust the size of the image. [Normal/True/Wide/Full/Custom/Digital zoom +/-/Keystone/Ceiling/Rear/Reset] (pp.42-44).For Video source, used to adjust the size of the image. [Normal/Wide/Custom/Keystone/Ceiling/Rear/Reset] (pp. 49-50).M InputUsed to select an input source (Input 1, Input 2, Input 3 or Network) (p.33).Note: Network will be not displayed when optional PJ-Net Organizer is not attached.R SoundUsed to adjust the volume or mute the sound (p.28).T InformationDisplay the input source information: Input, H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter,Filter counter, Power management, Key lock, PIN code lock, Shutter management, Simple mode, Remote control,and SERIAL NO. (p.29).V GuideThe key operation is displayed.S SettingUsed to set the projector’s operating configurations (pp.51-62).U NetworkSee the owner’s manual of “Network Set-up and Operation”.Menu Bar
