Sanyo PLC-XM100 Owner's Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Manual

Contents

51SettingLanguage EnglishMenu positionInput button Mode 1Display OnBackground BlueLogoLamp controlFilter controlFan control NormalSimple mode OnRemote control Mode 1RC sensor BackPower management OffSetting MenuPress the MENU button to display the On-Screen Menu.3UHVVWKH3RLQWŸźEXWWRQVWRVHOHFWSetting and press the3RLQWŹRUWKH6(/(&7EXWWRQWRDFFHVVWKHVXEPHQXLWHPV12 8VHWKH3RLQWŸźEXWWRQVWRVHOHFWWKHGHVLUHGLWHPDQGWKHQSUHVVWKH3RLQWŹRUWKH6(/(&7EXWWRQWRDFFHVVWKHselected item.This projector has a Setting menu that allows you to set up theother various functions described below.3 8VHWKH3RLQWŸźEXWWRQVWRVHOHFWWKHGHVLUHGLWHPDQGthen press the SELECT button.The language used in the On-Screen Menu is available in English,German, French, Italian, Spanish, Portuguese, Dutch, Swedish,Russian, Chinese, Korean and Japanese.LanguageThis function is used to change the position of the On-Screen Menu.Select Menu position and press the SELECT button. The Menuposition screen appears.The Menu position changes each time you press the SELECT buttonas follows.the top left Æ the top right Æ the center Æ the bottom left Æ thebottom right Æthe top left Æ.....This function detects the input signal automatically. When a signal isIRXQGWKHVHDUFKZLOOVWRS8VHWKH3RLQWŸźEXWWRQVWRVHOHFWRQHof the following options.Mode 1......Input search will not work.Mode 2......Input search works under the following situation:– When pressing the INPUT button on the side control.or the remote control.Mode 3......Input search works under the following situation:– When turning on the projector by pressing the ON/STAND-BY button on the side control or pressing theON button on the remote control.– When pressing the INPUT button on the remotecontrol or on the side control.- When no signal is detected.3Note:•While Input button is set to Mode 3, and no signal isdetected, if the Shutter or Freeze function is active, cancelit to activate the Input search.•While Input button is set to Mode 1 or Mode 2, the statusof Input and Lamp are displayed every time the signal isswitched.•Only the last selected input source can be detected.•If the INPUT, INPUT 1, INPUT 2, INPUT 3, ON / STAND-BY or MENU button is pressed during Input search isin progress, Input search will stop and go back to theprevious input signal.SettingLanguageMenu positionInput button