Sanyo PLC-XM100 Owner's Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Manual

Contents

5All the safety and operating instructions should be read beforethe product is operated.Read all of the instructions given here and retain them forlater use. Unplug this projector from AC power supply beforecleaning. Do not use liquid or aerosol cleaners. Use a dampcloth for cleaning.Follow all warnings and instructions marked on the projector.For added protection to the projector during a lightning storm,or when it is left unattended and unused for long periods oftime, unplug it from the wall outlet. This will prevent damagedue to lightning and power line surges.Do not expose this unit to rain or use near water... forexample, in a wet basement, near a swimming pool, etc...Do not use attachments not recommended by themanufacturer as they may cause hazards.Do not place this projector on an unstable cart, stand, ortable. The projector may fall, causing serious injury to a childor adult, and serious damage to the projector. Use only witha cart or stand recommended by the manufacturer, or soldwith the projector. Wall or shelf mounting should follow themanufacturer's instructions, and should use a mounting kitapproved by the manufacturers.An appliance and cart combinationshould be moved with care. Quick stops,excessive force, and uneven surfacesmay cause the appliance and cartcombination to overturn.Slots and openings in the back and side of the cabinet areprovided for ventilation, to ensure reliable operation of theequipment and to protect it from overheating.The openings should never be covered with cloth or othermaterials, and the bottom opening should not be blockedby placing the projector on a bed, sofa, rug, or other similarsurface. This projector should never be placed near or over aradiator or heat register.This projector should not be placed in a built-in installationsuch as a book case unless proper ventilation is provided.Never push objects of any kind into this projector throughcabinet slots as they may touch dangerous voltage pointsor short out parts that could result in a fire or electric shock.Never spill liquid of any kind on the projector.Do not install the projector near the ventilation duct of air-conditioning equipment.This projector should be operated only from the type of powersource indicated on the marking label. If you are not sure ofthe type of power supplied, consult your authorized dealer orlocal power company.Do not overload wall outlets and extension cords as this canresult in fire or electric shock. Do not allow anything to rest onthe power cord. Do not locate this projector where the cordmay be damaged by persons walking on it.Do not attempt to service this projector yourself as openingor removing covers may expose you to dangerous voltageor other hazards. Refer all servicing to qualified servicepersonnel.Unplug this projector from wall outlet and refer servicing toqualified service personnel under the following conditions:a. When the power cord or plug is damaged or frayed.b. If liquid has been spilled into the projector.c. If the projector has been exposed to rain or water.d. If the projector does not operate normally by followingthe operating instructions. Adjust only those controls thatare covered by the operating instructions as improperadjustment of other controls may result in damage and willoften require extensive work by a qualified technician torestore the projector to normal operation.e. If the projector has been dropped or the cabinet has beendamaged.f. When the projector exhibits a distinct change inperformance-this indicates a need for service.When replacement parts are required, be sure the servicetechnician has used replacement parts specified by themanufacturer that have the same characteristics as theoriginal part. Unauthorized substitutions may result in fire,electric shock, or injury to persons.Upon completion of any service or repairs to this projector,ask the service technician to perform routine safety checks todetermine that the projector is in safe operating condition.Safety InstructionsNOTE FOR CUSTOMERS IN THE USHg LAMP(S) INSIDE THIS PRODUCT CONTAINMERCURY AND MUST BE RECYCLED OR DISPOSEDOF ACCORDING TO LOCAL, STATE OR FEDERALLAWS.