Sanyo PLC-XM100 Owner's Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Manual

Contents

78The projector is detecting abnormal condition.IndicatorsProjector ConditionPOWERgreenLAMPredWARNINGTEMP.redWARNINGFILTERorangeSHUTTERblueLAMPREPLACEorangeIf the Filter counter reached a time set in the timer setting, a Filterreplacement icon (Fig.2) appears on the screen and the WARNINGFILTER indicator on the top panel lights up. Replace the filter assoon as possible. If the filter is out of scroll and the projector reachesa time set in the timer setting, Fig. 3 appears on the screen and theWARNING FILTER indicator lights up. Replace the filter cartridge assoon as possible.If the filter is clogged and no scroll is left in the filter cartridge, a Filtercartridge replacement icon (Fig.4) appears on the screen and theWARNING FILTER indicator lights up. Replace the filter cartridge assoon as possible.3Note:Fig.2, Fig.3 and Fig.4 icon will not appear when the Display function isset to Off (p.52) or during “Freeze” (p.30).The filter cartridge is not installed in the projector. Check the filtercompartment to see if the filter cartridge is installed in the projector.When the filter cartridge is installed and the indicators continue tolight and blink, read the column below.The projector detects an abnormal condition and cannot be turnedon. Unplug the AC power cord and plug it again to turn on theprojector. If the projector is turned off again, unplug the AC powercord and contact the dealer or the service center. Do not leave theprojector on. It may cause an electric shock or a fire hazard.The shutter is out of control.The shutter is out of control. (The projector is in the cooling mode.)The shutter is out of control. (The projector is in the stand-by mode.)In that case, contact the service station immediately.Fig.2 Filter replacement iconFig.4 Filter cartridge replacement iconFig.3Appendix¼ ¼¼¼¼¼¼¼¼¼¼¼ ¼