Sanyo PLC-XP55L Owner's Manual

Also see for PLC-XP55: Specifications

Contents

Sanyo PLC-XP55L Owner's Manual Manual pdf 12 page image

12CONNECTING PROJECTORS–VIDEOR–AUDIO–LVIDEO/Y Cb/Pb Cr/PrVIDEO/Y Cb/Pb Cr/PrRESET CONTROL PORTUSBAUDIO 1 AUDIO 2ANALOG IN/OUT DIGITAL(DVI-D)INPUT 1INPUT 2INPUT 3R/C JACKG B R H/V V(MONO)IN/OUTTERMINALS OF PROJECTORWhen controlling computerwith Remote Control Unit ofthis projector, connect mouseport of your personal computerto this connector. (Refer toP13.)Connect S-VIDEOoutput from videoequipment to thisjack. (Refer to P14.)Connect an audio outputfrom video equipment tothese jacks.(Refer to P14.)CONTROL PORT CONNECTORCOMPUTER AUDIOINPUT 1/AUDIO MONITOROUTPUT JACKAUDIO INPUT JACKSVIDEO INPUT JACKS S-VIDEO INPUT JACKConnect composite videooutput from video equipmentto VIDEO/Y jack or connectcomponent video outputs toVIDEO/Y, Cb/Pb and Cr/Prjacks. (Refer to P14.)This terminal is switchable andcan be used as computer input ormonitor output. Set the terminal upas either Computer input orMonitor output properly beforeusing this terminal.Refer to P13, P23.)Note; This terminal outputs from 5BNC type computer input onINPUT 2 jacks only.COMPUTER INPUT/MONITOROUTPUT TERMINAL (ANALOG)This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures onpages 12 to 14 and connect properly.This projector uses a micro processorto control this unit, and occasionally,this micro processor may malfunctionand need to be reset. This can bedone by pressing RESET button with apen, which will shut down and restartunit. Do not use RESET functionexcessively.RESET BUTTONWhen controlling computer withRemote Control Unit of thisprojector, connect USB terminalof your personal computer tothis terminal. (Refer to P13.)USB CONNECTOR (Series B)✽ Do not press this button. This buttonis used for our optional accessories.Connect component videooutput (Y, Cb, Cr or Y, Pb, Pr)from video equipment toVIDEO/Y, Cb/Pb and Cr/Prjacks or connect computeroutput {5 BNC Type (Green,Blue, Red, Horiz. Sync andVert. Sync.)} from computerto G, B, R, H/V and V jacks.(Refer to P13 and 14.)5 BNC INPUT JACKSWhen using Wired/WirelessRemote Control Unit as WiredRemote Control, ConnectWired Remote Control Unit tothis jack with Remote ControlCable (supplied).R/C JACKConnect an audio output(stereo) from computer tothis jack.(Refer to P13.)COMPUTER AUDIOINPUT 2 JACKConnect computer output(Digital DVI-D type) to thisterminal.HD (HDCP Compatible) signalcan also be connected.Refer to P13.)COMPUTER INPUTTERMINAL (DIGITAL)This terminal is switchableand can be used as computeraudio input 1 or audio monitoroutput (variable).Set the terminal up as eitherComputer audio input 1 orAudio Monitor output properlybefore using this terminal.Refer to P13, P23.)