Sanyo PLC-XP55L Owner's Manual

Also see for PLC-XP55: Specifications

Contents

Sanyo PLC-XP55L Owner's Manual Manual pdf 24 page image

24COMPUTER INPUTThis projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to“COMPATIBLE COMPUTER SPECIFICATION” on page 49). When a computer is selected, this projector automaticallytunes to incoming signal and projects the proper image without any special setting. (Some computers need to be setmanually.)The projector displays one of the Auto, -----, Mode 1/2/3/4/5, or the system provided in the projector.When projector cannot recognize connected signal as PCsystem provided in this projector, Auto PC Adjustmentfunction operates to adjust projector and message “Auto”is displayed on SYSTEM Menu icon.When image is not provided properly, manual adjustmentis required. (Refer to P26 and 27.)There is no signal input from computer. Make sureconnection of computer and a projector is set correctly.(Refer to TROUBLESHOOTING on page 46.)Auto––––PC SYSTEM Menu iconDisplays system beingselected.PC SYSTEM MENUSELECT COMPUTER SYSTEM MANUALLYPress MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to move a red frame pointer to PCSYSTEM Menu icon.Press POINT UP/DOWN button to move a red arrow pointer tosystem that you want to set, and then press SELECT button.12PC SYSTEM MENUThis projector automatically selects PC system among those providedin this projector and PC system can be also selected manually.AUTOMATIC MULTI-SCAN SYSTEMPress MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon.Press POINT UP/DOWN button and a red-arrow icon willappear. Move arrow to "RGB", and then press SELECT button.13When connect a computer output [5 BNC Type (Green, Blue, Red,Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and Vjacks.WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )Input 2INPUT MENUMove a pointer to RGB andpress SELECT button.Source Select MenuPress POINT UP/DOWN button to move a red arrow pointer toInput 2 and then press SELECT button. Source Select Menu willappear.2INPUT Menu iconMove a pointer (red arrow) toInput 2 and press SELECTbutton.PC SYSTEM Menu iconDisplays system being selected.Systems on this dialog box canbe selected.Custom Mode (1~5) set in PCADJUST Menu. (P26, 27)User preset adjustment in MANUAL PC ADJUSTMENT.Adjustment data can be stored in the Mode 1-5.Mode 1Computer systems provided in the projector. Theprojector chooses proper system and displays it.SVGA 1Mode 1 and SVGA 1 are examples.✽