Sanyo PLC-XP55L Owner's Manual

Also see for PLC-XP55: Specifications

Contents

Sanyo PLC-XP55L Owner's Manual Manual pdf 23 page image

23COMPUTER INPUTSELECTING INPUT SOURCEDIRECT OPERATIONSelect INPUT source by pressing INPUT button on Top Control.Select INPUT source by pressing INPUT 1, INPUT 2 or INPUT 3button on Remote Control Unit.If projector cannot reproduce proper image, select correct input sourcethrough MENU OPERATION (see below).INPUT buttonInput 1Input 2Input 3SELECTING COMPUTER SYSTEMWHEN SELECT INPUT 1 (COMPUTER INPUT TERMINALS )Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon.Press POINT UP/DOWN button to move a red arrow pointer toInput 1 and then press SELECT button. Source Select Menu willappear.12Input 1INPUT MENUMove a pointer to source that you want to select and then pressSELECT button.3When your computer is connected to INPUT 1 (DIGITAL)terminal, select RGB(PC Digital).RGB(AV HDCP)When your computer is connected to INPUT 1 (ANALOG)terminal, select RGB(Analog).RGB(Analog)MENU OPERATIONPress MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to move a red frame pointer toINPUT Menu icon.Press POINT UP/DOWN button and a red-arrow icon willappear. Move arrow to INPUT source that you want to select,and then press SELECT button.12Move a pointer to sourceand press SELECT button.Source Select MenuINPUT Menu iconINPUT Menu iconMove a pointer (red arrow) toInput 1 and press SELECTbutton.RGB(PC Digital)RGB(Scart)Monitor outWhen video equipment is connected to INPUT 1 (ANALOG)terminal, select RGB(Scart).Input 1 is not displayed when the Input 1 is used asMonitor out.✽NOTE Input 1 terminal is switchable and can be used as computer input ormonitor output.✽If a HDCP-compatible signal source is connected to the INPUT 1(DIGITAL) terminal, select RGB(AV HDCP).If the INPUT 1 ANALOG terminal is being used as a MONITOROUT terminal, select Monitor out.NOTE;HDCP (High-bandwidth Digital ContentProtection) is a system for protecting digitalentertainment content which is delivered by DVI(Digital Visual Interface) from being copied.The specification of HDCP is decided andcontrolled by Digital Content Protection, LLC.Should the specification be changed, thisprojector may not display the digital contentprotected by HDCP.