Sanyo PLC-XP55L Owner's Manual

Also see for PLC-XP55: Specifications

Contents

Sanyo PLC-XP55L Owner's Manual Manual pdf 41 page image

41APPENDIXOPERATING WIRELESS MOUSEINSTALLATIONWireless Remote Control Unit is not only able to operate this projector but also function as a wireless mouse for mostPersonal Computers. POINT button, drag ON/OFF button and two CLICK buttons are used for wireless mouse operation.This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen.Connect the mouse port (or USB port) of your computer toControl Port (or USB connector) of this projector with ControlCable (or USB cable). (Refer to page 12, 13 for connection.)Turn the projector on first, and then turn on your computer.When the computer is switched on first, Wireless Mouse may notwork properly.12To use Wireless Remote Control Unit as Wireless Mouse for a Personal Computer, installation of the mouse driver (notsupplied) is required. Make sure that the mouse driver is properly installed in your computer. And make sure that the mouseport (or USB port) of a Personal Computer is activated.OPERATING WIRELESS MOUSEWhen controlling a PC mouse pointer, operate Wireless Mouse with POINT button, Drag ON/OFF button, LEFT CLICKbutton and RIGHT CLICK button on Wireless Remote Control Unit.Used to move PC mouse pointer. The pointer is movedcorresponding with the direction you are pressing.POINT buttonThis button has the same function as the left button in a PC mouse.Press this button and the POINT button to drag a selected screenobject.LEFT CLICK buttonThis button has the same function as the right button in a PC mouse.RIGHT CLICK buttonNote : When your computer has no mouseport, connect Serial Port of yourcomputer to Control Port of theprojector with Control Cable for SerialPort (supplied).LOCKFREEZESELECTD.ZOOMMUTEVOLUME-MENUNO SHOWIMAGEVOLUME+KEYSTONELASERP-TIMERZOOMCOMPUTER 1COMPUTER 2VIDEOFOCUS LENSAUTO PC ON-OFFPOINT button(Move the pointer)LEFT CLICK button(left button of the mouse)RIGHT CLICK button(right button of the mouse)DRAG ON/OFFbuttonUse this button and the POINT button to drag a selected screenobject. Press and release the Drag ON/OFF button, DRAG ONINDICATOR lights green and the remote control is in Drag mode.Use the POINT button in the direction that you want to drag thescreen object. Press and release the Drag ON/OFF button again orpress any other button, to drop the object at the new screen location.DRAG ON/OFF buttonDRAG ONINDICATOR